New Site Format
     As you know
  StampedeProject has
  become way more than
  just Stampede, Traxxas,
  to now include other
  RC brands, accessories,
  and cars. I still don't sell
  anything, I just
  enthusiastically promote
  those RC products I think
  are great.
     Take a look through
  the above links.
  I simply had too much
  information for my
  old site format.
  More fun projects
  coming...
  - Tony

  StampedeProject.com

  Please Private Message
  me Here on the
  Traxxas Forum    

  Copyright 2007
  all rights reserved 

The Fast Lane Machine FLM SPV2 Chassis - September 7th 2008
Designed by Tony Arnold - StampedeProject.com

These photos and promotional information is provided for use by Fast Lane Machine Retailers or for use in publication. 

Please contact FLM FAST LANE MACHINE for information regarding distribution of this product.

ABOUT THE FLM SPV1 & SPV2 Crawler Chassis

FLM's SPV1-81 & SPV2-81 Rock Crawler Chassis – For AX10 & Other Driveshaft Crawlers

This super light and durable 81mm spacer width chassis is specifically designed as a direct bodiless stock chassis replacement for the Axial Scorpion AX10 using the stock skid plate. The chassis also works great for anyone doing a custom HPI Wheelie King, or Tamiya TXT/TLT rock Crawler build. The milled 81mm chassis spacers are drilled, tapped and ready for your body panels or scale accessories to be mounted. Both the SPV1-81 and SPV2-81 chassis will accommodate Axial, Losi Crawler, EMaxx and other similar rock crawler shocks in both sprung and droop crawler suspension configurations. For those wanting the ultimate in mounting flexibility, the SPV1-81's extra tuning holes will provide the customer crawler builder nearly unlimited tuning options. This chassis conforms to the 2008 USRCCA chassis rules for competition with required hood, roof and door body panels (not included) installed. The SPV1 and SPV2 chassis are StampedeProject.com designs.

Approximate Weight 5oz.

SPV1-81 & SPV2-81 Chassis Include:
Chassis plates
Seven (7) – 81mm Milled Chassis Spacers
Fourteen (14) – 3mm Machine Screws
Four (4) – Milled Shock Mount Offsets



FLM's SPV1-55 & SPV2-55 Rock Crawler Chassis – For 2.2 Class Berg & Clod Crawlers

This super light and durable 55mm spacer width chassis is specifically designed as a direct bodiless chassis for Berg and Tamiya Clodbuster style rock crawler builds. The milled 55mm chassis spacers are drilled, tapped and ready for your body panels or scale accessories to be mounted. Both the SPV1-55 and SPV2-55 chassis will accommodate Axial, Losi Crawler, EMaxx and other similar rock crawler shocks in both sprung and droop crawler suspension configurations. For those wanting the ultimate in mounting flexibility, the SPV1-55's extra tuning holes will provide the customer crawler builder nearly unlimited tuning options. With the included 8mm body panels spacers installed and required hood, roof and door body panels (no included), this chassis conforms to the 2008 USRCCA chassis rules for competition. The SPV1 and SPV2 chassis are StampedeProject.com designs.

Approximate Weight 5oz.

SPV1-55 & SPV2-55 Chassis Include:
Chassis plates
Seven (7) – 55mm Milled Chassis Spacers
Fourteen (14) – 3mm Machine Screws
Four (4) – Milled Shock Mount Offsets
Four (4) – 8mm Milled Body Panel Offsets

------------------------

THE RTR BUILD
Just to assure everything was lined up I picked up a Axial RTR and swapped out and simply swapped out the chassis with the SPV2-81.  Gotta say a pretty nice upgrade that allows for some real tuning options for even on the RTR even if you just want to build a rock racer.  I will run though a build using the SPV2-81 and an Axial RTR.

  The following are available in large 6MB format (Click for the large image)