New Site Format
     As you know
  StampedeProject has
  become way more than
  just Stampede, Traxxas,
  to now include other
  RC brands, accessories,
  and cars. I still don't sell
  anything, I just
  enthusiastically promote
  those RC products I think
  are great.
     Take a look through
  the above links.
  I simply had too much
  information for my
  old site format.
  More fun projects
  coming...
  - Tony

  StampedeProject.com

  Please Private Message
  me Here on the
  Traxxas Forum    

  Copyright 2007
  all rights reserved 

Dyeing to Look Cool 
by Tony Arnold StampedeProject.com
As published in RC Car Magazine August 2007

I think we all can agree that basic black chassis parts and dyeable white wheels will forever rule as top part colors, but what if we want to turn some heads? In this case, our house Traxxas Rustler with new dyeable gray Traxxas parts were just begging for some highly durable custom colored cool. A couple key how-to's from RC Car will add a that same custom touch to your ride without a three day clean up process and having your hands look like you just escaped from a freshman initiation prank. To walk through the process, we are going to dye our trusty Rusty with readily available Rit clothing dye. Of course we also have a few little upgrades planned to turn our Rustler into a real head turner and performer.

About Rit Dye
Rit fabric dyes are available in almost every grocery, craft, and superstore around the country and normally cost less than $4 per bottle. This is a pretty cheap and easy upgrade as one bottle will easily dye over 5lbs of parts. Rit fabric dye is first and foremost non-toxic, so the only disposal and handling concerns are where to pour out the dye bath after you are done - I pour mine outside in the dirt. I prefer the liquid dye from a results and mess perspective, as I find the powder dye tends to be messier and needs to be dissolved first.

Getting Started
There are a couple dyeing methods, but the old "stovetop" method consistently delivers the best results because heat can be regulated throughout the dyeing process whether the parts needs five minutes or an hour. Following this method, I grabbed my 4 gallon thrift store pot, dumped in all the disassembled and clean dyeable parts and covered them with an extra 2"-3" of water. Large parts such as a chassis can be flipped in the pot several times during the process, so you don’t necessarily need everything completely submerged. All the parts were pulled out, the pot placed on my grill burner and then the water was brought to a slow boil.  Do as many parts as you can at once, however only use as much water and dye as is needed – no since using 3 gallons of water and a bottle of dye for a set of wheels. 

Helpful Suggestions
My furry helper inspected and assured all the parts were clean and grouped together. Thinking about parts retrieval in the beginning is a plus, one of my tricks is to loosely attach a zip tie or wire to groups of parts. My dog thought this was to make them easier for him carry around.  This is the point you really want to assure your plastic drop cloth is place and your gloves and tongs are handy, because it's about to get messy.

Getting Your Color On
Once the water started boiling, I dropped the heat to a high simmer or about medium low, slipped on some latex gloves, and then added about a ¼ bottle of Rit dye per ½ gallon. In my case that was two bottles of dye, noting that’s stronger than what is recommended for fabric. Stir, add back in all your parts, and stir again. Occasionally, give the entire brew a careful stir to assure uniform color. No matter how careful you are at his point, you are going to get dye on your hands and your clothes so be prepared.

Cooking Time
So how long do we cook our RC parts? That depends how dark or vivid you want them. Keep checking and pull them out when the color looks good.  For lighter colors 5-10 minutes is all that is required. Deep dark colors such as the intensely dark red wine color took an hour. The three keys to getting deep rich colors are using more dye, maintaining simmering water temperatures, and allowing adequate time in the dye bath. Typically I get the color almost where I want it and then just turn off the heat and let things cool down for 15 minutes.

Finishing & Cleaning Up
When the desired color is reached remove the parts using your kitchen tongs or by using the wires and place the parts into a bucket and let completely cool and drain. Keep in mind even though most of the dye has absorbed into the plastic, excess dye from the bath will still stain, so be careful.  If you have planned to do custom colors by combining dyes, now is the time to add the next color for the next round of dyeing - as an example I could have added some yellow for an orange dye bath, or blue for a purple dye bath - add in the next set of parts and repeat soaking process.

Once the parts have cooled, rinse them well either in a utility sink or outside to prevent staining. Clean up on most sinks and dishes can be done with foaming bathroom cleaner and abrasive powder bleach cleaner.

Custom Tweaks
Dye and paint are just cosmetic upgrades, but they add individuality and a custom component to your ride that makes everyone take a second look. As you can see the Rustler’s chassis, shocks, steering linkage and drive yokes came out great, but we couldn’t stop there. 

Along with an aluminum Idler gear upgrade, we upgraded the power with a Novak GTB 4.5R brushless motor/ESC system and A123 Lithium Ion 2S pack to make the Rustler a lighter and faster runner. RPM set us up with pretty much the entire accessory line up of their tougher and lighter bolt on Rustler upgrades.  RPM parts included front and rear arms, shock cups, 2-stage shock pistons (which I am a huge fan of), gear cover, 5x11 bearing carriers plus Boca Green Seal bearings, caster blocks, bumper, and Talon wheels with Losi Red Edge and Step-Pin tires. 

To up the tune-ability of the Rustler we upgraded to the mind-blowingly beautiful FLM - Fast Lane Machine $15 front and $24 rear billet machined aluminum shock towers - yeah we know that's a smoking deal.  These very reasonably priced parts provided drooling amounts of tuning adjustments that we have always wanted on the Rustler. Adjustable camber links will come on the next round of upgrades, however since a stock link was already in need of replacement, we are giving RPM's indestructible fixed camber links a bashing workout while we fiddle with all the new FLM shock tower adjustments and tune all that power.  

Our trusty Rusty now screams custom, looks better than new, and with the upgrades in durability, performance, and adjustability it should surprise more than a few. Amazing what a bottle of Rit dye and a bag full of tricks can do - very cool.

SOURCES: Traxxas www.RitDye.com, FLM Fast Lane Machine www.FastLaneMachine.com, RPM Products www.RPMRCProducts.com, Novak Electronics www.TeamNovak.com, A123 Racing www.a123racing.com, Traxxas www.Traxxas.com, Losi www.TeamLosi.com